Morphological reorganization and mechanical enhancement in multilayered polyethylene/polypropylene films by layer multiplication or mild annealing

Shortly after processing, Polyethylene/Polypropylene (PE/PP) multilayer films demonstrate an increase in tensile modulus and other mechanical properties when the individual layer thickness is below 0.5 µm. Subsequent annealing at 60 °C for 16 h brings the properties of all other samples to similar values. WAXD characterization of the layered films identified a prevalence of mesophase in the thicker PP layers. In samples with increased layer numerosity or subjected to annealing, WAXD detected its conversion to α crystalline phase that correlates with improved mechanical properties. SSNMR and DSC detailed the defective nature of α iPP crystallites. Comonomers, detected by NMR in the commercial polymers used for the films, are the source of “tunable disorder” that dictates the formation of the PP mesophase and the low temperature of conversion to the mechanically stronger defective α phase. Soft intrafilm layer interfaces instead enable nucleation and localized polymer chain rearrangement even without annealing. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 520–531     

Processing optimization: A way to improve the ionic conductivity and dielectric loss of electroactive polymers

Electro‐active polymers (EAPs) such as P(VDF‐TrFE‐CTFE) are greatly promising in the field of flexible sensors and actuators, but their low dielectric strength driven by ionic conductivity is a main concern for achieving high electrostrictive performance. It is well known that there is a quadratic dependence of the strain response and mechanical energy density on the applied electric field. This dependence highlights the importance of improving the electrical breakdown EAPs while reducing the dielectric losses. This article demonstrates that it is possible to dramatically increase the electrical breakdown and decrease the dielectric losses by controlling processing parameters of the polymer synthesis and fabrication procedure. As a result, an enhancement of around 70% is achieved in both the strain and blocking force. The effects on the dielectric losses of the polymer crystallinity, molecular weight, solvent purity, and crystallization temperature are also investigated. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1164–1173     

Plasma Treatment of Polymers

Abstract

Plasma treatment of polymers encompasses a variety of plasma technologies and polymeric materials for a wide range of applications and dates back to at least the 1960s. In this article we provide a brief review of the United States patent literature on plasma surface modification technologies and a brief review of the scientific literature on investigations of the effects of plasma treatment, the nature of the plasma environment, and the mechanisms that drive the plasma–surface interaction. We then discuss low‐radio‐frequency capacitively coupled nitrogen plasmas and their characteristics, suggesting that they provide significant plasma densities and populations of reactive species for effective plasma treatments on a variety of materials, particularly when placing the sample surface in the cathode sheath region. We further discuss surface chemical characterization of treated polymers, including some results on polyesters treated in capacitively coupled nitrogen plasmas driven at 40 kHz. Finally, we connect plasma characterization with surface chemical analysis by applying a surface sites model to nitrogen uptake of poly(ethylene terephthalate) (PET) and poly(ethylene naphthalate) (PEN) treated in a 40 kHz nitrogen plasma. This example serves to suggest an interesting practical approach to comparisons of plasma treatments. In addition, it suggests an approach to defining the investigations required to conclusively identify the underlying treatment mechanisms.     

Ranking ranges in cross-efficiency evaluations

The existence of alternate optima for the DEA weights may reduce the usefulness of the cross-efficiency evaluation, since the ranking provided depends on the choice of weights that the different DMUs make. In this paper, we develop a procedure to carry out the cross-efficiency evaluation without the need to make any specific choice of DEA weights. The proposed procedure takes into consideration all the possible choices of weights that all the DMUs can make, and yields for each unit a range for its possible rankings instead of a single ranking. This range is determined by the best and the worst rankings that would result in the best and the worst scenarios of each unit across all the DEA weights of all the DMUs. This approach might identify good/bad performers, as those that rank at the top/bottom irrespective of the weights that are chosen, or units that outperform others in all the scenarios. In addition, it may be used to analyze the stability of the ranking provided by the standard cross-efficiency evaluation.     

Digital Interferometric Measurement of Forced Convection Heat Transfer in a Miniature Rectangular Channel

Investigations have been performed on convective heat transfer in water flowing through mini-channels using the non intrusive technique of laser interferometry coupled with digital image processing. Optical glass channels, fabricated with metallic heating surfaces, were studied using a Mach-Zehnder interferometer configuration. Fringe patterns captured using a high-sensitivity CCD camera were analyzed digitally based on a calculation method developed for the liquid medium. Results of parametric studies were compared and contrasted with relevant theoretical solutions from the literature. Indication of the onset of turbulence at Reynolds numbers smaller than the conventional transition Reynolds number for large channels has also been noticed in the experimental investigation.     

Interior Layers for Second-Order Singular Equations

Our aim in this article is to study singularly perturbed problems which display boundary layers in the interior of the domain. These interior boundary layers which supplement the usual boundary layers at the boundary, are generated by discontinuities in the data. Second-order linear elliptic one-dimensional and multi-dimensional problems are considered in this article.     

Simultaneous quantification of ten Amadori compounds in tobacco using liquid chromatography with tandem mass spectrometry

Amadori compounds are aroma precursors formed in the initial phase of the Maillard reaction. Based on their similar structures, simultaneous quantification of more than six Amadori compounds in tobacco has not been reported yet. In this study, a simple and rapid method was developed to simultaneously quantify ten Amadori compounds including the isomers of Fructose‐isoleucine and Fructose‐leucine in tobacco. The separation was performed on an Atlantis T₃ column (2.1 × 250 mm, 5 μm) by gradient elution using acetonitrile and water as the mobile phases. The quantification method was systematically evaluated and proven to be sensitive and accurate. The linearity was good, with correlation coefficients of 0.9977–0.9999. The limits of detection and quantitation were 1.354–2.532 and 4.516–8.444 ng/mL, respectively. The recoveries were 84.0–119.6%, and the relative standard deviations were 1.33–5.40%. The method was used to analyze the changes in the amounts of ten Amadori compounds in tobacco before and after tobacco primary processing. The analysis shows that the Maillard reaction occurs during the short processing period.     

Incorporating the learning effect into data envelopment analysis to measure MSW recycling performance

The effect of organizational learning, which results in continuous improvement of organizational performance over time, has been widely discussed. The cumulative learning effect may form as a source of intellectual capital. Thus far, the static data envelopment analysis (DEA) model has not been used to examine the longitudinal learning effect. Therefore, a two-stage approach is developed together with the estimation of a latent learning effect using time-series data; the estimated learning effect is then used as an input in the DEA Slacks-Based Measure (SBM) model. The proposed DEA SBM model can be used to investigate the efficiency of the organizational learning effect of Municipal Solid Waste (MSW) recycling systems.     

Two stage electrostatic separator for the recycling of plastics from waste electrical and electronic equipment

The aim of study was to evaluate the effectiveness of a new facility for recycling of plastics from granular waste electrical and electronic equipment. The installation consists of two sections, the products of a first tribo-aero-electrostatic separator being subsequently treated in two free-fall electrostatic separators. The tests were performed on a mixture of polycarbonate (PC) and polyamide (PA). Analysis of the purity of the products obtained was performed using a program of image processing in MATLAB. Products of very high purity (roughly 95% for both PC and PA) were obtained at a recovery rate higher than 70%.     

Markierung von Humanserumalbumin mit 131J durch elektrochemische Oxydation von Jodid zum Jod

Es wird über eine Methode und deren optimale Bedingungen berichtet, die eine schnelle, schonende und fernbediente Markierung von Humanserumalbumin mit ¹³¹ J gestattet. Die Markierungsausbeuten, bezogen auf das eingesetzte Jod, sind gut reproduzierbar und liegen bei über 90%.